Annotations
Vivid S70 / S60 – User Manual 4-17
BC092760-1EN 01
Figure 4-9. Default bodymark
When Bodymark is activated, Probe Mark position is moving by
default. The left “Set” key can be used to switch between Probe
Mark Move and Body Mark Move. The system will stay in
Bodymark or text mode after Probe Mark position is adjusted. In
Freeze, “Depth” control can be used to rotate Probe Mark when
Bodymark is active.
The system will stay in Bodymark or text mode when Active side
is changed.
To Next Page
Loading...
