Advanced cardiac measurements and analysis
Vivid S70 / S60 – User Manual 8-45
BC092760-1EN 01
Figure 8-23. Tracing the endocardial border
Exiting AutoEF
At any time, the tool can be cancelled by pushing the Cancel
button. The plugin will close and any unsaved data will be lost.
When in the Results stage the operator may click the Approve
and Exit button. The tool will enter the dual layout of the most
recently processed view and prompt the operator whether the
results should be stored. If yes, measurements are transferred
to the worksheet and a result file with a screenshot of the dual
screen will be generated. See also section ‘Reprocessing data’
on page 8-45.
Reprocessing data
The data from a saved AutoEF analysis may be reprocessed.
NOTE: When doing reprocessing, if the operator chooses to store the
results, the results will be treated as new analysis with new
measurements in the worksheet and a new thumbnail in the
clipboard.
1. Single view analysis stored
• Double-click on the thumbnail showing the AutoEF dual
screen result layout. A dual screen is displayed,
showing the dual view result screen and the cineloop
processed in that analysis.
• Launch AutoEF. The tool will proceed to the Results
stage. You may choose to reprocess the view already
analyzed or to complete the analysis adding the missing
view to the analysis.
To Next Page
Loading...
