Retrieving and editing archived information
Vivid S70 / S60 – User Manual 10-19
BC092760-1EN 01
Additional Patient ID
The Vivid S70 / S60 system supports an additional field for
Patient ID number.
To create/remove an additional Patient ID
1. In the Patient info and exam screen, make sure that the
option Additional info is checked in order to display the
Patient IDs field.
Figure 10-8. The Patient IDs field
2. To create an additional Patient ID, press Add.
The Add Patient ID window is displayed.
3. Enter a Patient ID and your identifier as issuer and press
OK.
The new Patient ID is displayed in the Patient IDs field.
To make this new Patient ID the primary ID, select the
Primary radio button next to the ID. A confirmation window
is displayed. Press OK to confirm.
4. To remove an additional Patient ID, select the Patient ID and
press Remove. A confirmation window is displayed. Press
OK to confirm.
NOTE: A Primary Patient ID cannot be removed.
To Next Page
Loading...
