GE Vivid S60

Retrieving and editing archived information
Vivid S70 / S60 – User Manual 10-23
BC092760-1EN 01
Diagnosis code
Adding Diagnosis codes
1. In the Patient info and exam screen, press next to the
Code field.
The Code list is displayed.
2. Select the codes to enter.
The codes selected are displayed in the Patient info and
exam screen.
Removing entered Diagnosis codes
1. In the Patient info and exam screen, press next to the
Code field.
The Code list is displayed.
2. Uncheck the codes to remove.
Creating a Diagnosis code
1. In the Patient info and exam screen, press next to the
Code field.
The Code list is displayed.
2. Select New code.
The New code window is displayed.
3. Enter the new code.
4. Press OK to exit.
Diagnostic codes can also be created and deleted from the
configuration package:
1. Press Utility/Config on the Touch panel to access the
configuration package.
2. In the Configuration package, select the category Report
and the Tab sheet Diag. Codes.
Figure 10-12. The Diagnostic codes sheet