Report designer
Vivid S70 / S60 – User Manual 11-31
BC092760-1EN 01
Inserting a table
1. Place the cursor at the desired insertion point in the Report
template design area.
2. Press Insert and select Table.
The Container properties window is displayed (see
Figure 11-16).
3. Adjust the parameters as desired.
4. Press OK.
The table is displayed in the template.
NOTE: To modify an inserted table, double-click in an empty area in
the table. A selection menu is displayed where the user can
add, delete a row or a column or open the Table properties
window.
Figure 11-16. The Table properties window
To Next Page
Loading...
