Customize Configuration
12-32 Vivid S70 / S60 – User Manual
BC092760-1EN
01
The Modify calculations sheet
The Modify calculation sheet is used to configure the
calculations to be performed for Doppler vascular
measurements.
Figure 12-20. The Modify calculations sheet
The following example describes how to configure the Carotid
Doppler calculations.
1. In the Modify calculations sheet, select Vascular next to
M&A Categories.
The Vascular measurement category is displayed.
2. Select Carotid.
The available calculations are displayed.
3. Check the desired calculations to be performed.
4. Select Save.
To Next Page
Loading...
