5. Click on the
Keyboard Layout
button.
Keyboard Layout Modification procedure depends on the operating system (Windows 7 or Windows 10).
Procedure at Windows 7 (EC300-EC320)
1.
Select the input language from the pull-down menu.
Figure 6-5 input language
Note
If the desired language is not listed, click the Add button, choose the desired input language from the pull-
down menu, as shown in Figure 6-6 below, and then confirm with OK.
Figure 6-6 add input language
2. If not already done, select the default input language from the pull-down menu. The corresponding
keyboard layout is changed accordingly.
3. Click on
Apply
and then close the window with
OK
.
4. Close the Service page with
Save&Exit
and restart the system.
5. Reenter “Keyboard Layout”. This time
Remove
unused language(s).
6. Test the Keyboard function:
-
Press the ABC key on the control console.
-
Press some keys on the keyboard and verify the entered text.
Service Adjustments
6-6
Voluson E-Series Service Manual
5539550APB Revision 6
To Next Page
Loading...
