User Manual corpuls
3
Configuration
ENG - Version 2.1 – P/N 04130.2 175
1. Select in the main menu "Telemetry" ► "Connections".
The configuration dialogue opens.
Fig. 7-25 Telemetry connections (Persons responsible for the device)
2. Select „Add destination“ by pressing the jog dial.
3. Enter the recipient‘s name.
4. Enter the recipient type.
5. Enter the recipient‘s address or phone number.
6. Confirm by pressing the softkey [Enter].
7. To confirm the settings and close the configuration dialogue, press the
softkey [OK].
To abort data entry and close the configuration dialogue, press the softkey
[Cancel].
There are five options for recipient type:
• FAX-S (digital fax server)
• FAX-G (analogue fax)
• CWEB
• CWEB AUTO
• E-mail.
There are up to 20 memory locations available for saving the short codes.
The recipient’s name is limited to a maximum of 16 characters, the recipient’s
number to a maximum of 16 digits.
For data backup purposes or for transmission to other devices, the saved
telemetry connections (phonebook) can be copied.
Saving telemetry
connections
(Fax recipients)
To Next Page
Loading...
