GS corpuls3 - Data Management; Creating a Patient File

Configuration User Manual corpuls
3
174 ENG - Version 2.1 – P/N 04130.2
2. For a D-ECG transmission to a fax server, tick the checkbox "Fax server". If
this field is not enabled, the D-ECG will be sent to a fax machine selected
in the phone book.
3. Enter the network address of the server (IP address or domain) and
confirm.
4. Enter the TCP port and confirm.
In the group „corpuls.web“ the following fields can be configured for connection
to the corpuls.web server:
1. Enter the standard TCP port and confirm.
2. Enter the standard UDP port and confirm.
3. To configure the method of establishing a connection:
a) Select „Manual“ in the field "Connections", to start the connection
manually via the main menu.
b) Select „Startup“ in the field "Connections" if the connection should be
established automatically while the corpuls
3
is booting. For this setting,
a phone book entry CWEB Auto has to be created.
Select the required setting with the jog dial and confirm.
4. In the field „Reconnect“ can be determined if and how often the corpuls
3
should automatically reconnect if the connection has been broken (e. g. if
the GSM net is not available). Select the required setting and confirm.
5. Select, if the connection to corpuls.web should be established via GPRS
(option) or via LAN (option).
If the checkbox "Auto upload" in the group "D-ECG" is ticked and a connection
is established, the recorded D-ECG is automatically sent to a corpuls.web
server by pressing the softkey [Print]. It is not necessary to press the softkey
[Send] as well.
In the group „LAN interface“ (optional) the network configurations can be
assigned automatically via a DHCP server or entered manually. For a manual
configuration the checkbox of the field "DHCP" has to be disabled.
Manual network configuration:
1. Enter the network address of the corpuls
3
(IP address) and confirm.
2. Enter the network mask (IP address) of the network and confirm.
3. Enter the default gateway (IP address) of the network and confirm.
4. Enter the primary DNS server (IP address) and confirm.
5. If available, enter the secondary DNS server (IP address) and confirm.
The settings described in the following have to be saved in the system settings
in the group „Configuration“ in order to be available permanently.
Note
LAN interface
configuration
Symbol
IP address
assi
gned
Automatic
Upload of D-
ECG
Configuration
corpuls.web