GS corpuls3 - Page 283

User Manual corpuls
3
Procedure in case of malfunctions
ENG - Version 2.1 – P/N 04130.2 271
Notification in the
message line and
information in the
protocol
Explanation/Measure
Switch off Pacer? - Power
OFF?
 Confirmation prompt asking if the stimulation should be ended and
the corpuls
3
should be switched off.
Synd setting: [TEXT]
The synd setting has been changed in manual mode to Async, Auto
or Sync.
System Power-down in
[NUMBER] s
Count-down indicating the remaining time until the corpuls
3
shuts
down.
Therapy electrodes loose
 Check all connections of the corPatch electrodes.
 Connect corPatch electrodes to the patient.
 Check contact of corPatch electrodes with skin.
 If necessary, re-connect all connections of the corPatch
electrodes.
 If the alarm message persists, connect immediately the reserve
corPatch electrodes.
Unlock keyboard?
Confirmation prompt asking if the keyboard lock should be
disengaged.
User [TEXT] logged in
successfully
Notification which user level has been logged in.
UTC offset
UTC+[NUMBER], AutoDST
-> UTC+[NUMBER],
AutoDST
Event in the protocol, recording that the time zone settings have been
changed.
Table 10-14 Notification in the message line and information in the protocol