60
Checking Wiring
If the wiring judgment result is red (FAIL) or yellow (CHECK)
1
Select an item to be checked.
Move the cursor
A dialog box with helpful information for xing
the wiring will be displayed.
2
Review its contents.
(Press the [ESC] key to close the dialog box)
3
Press the [WIRING] key to display the
WIRING, wiring settings screen.
4
Verify that the actual wiring connections
are the same as the ones shown on the
screen.
Correct the wiring if the connections are
incorrect.
5
Once again, press [WIRING] key and
conrm the wiring judgment result on
WIRING, wiring check conrmation
screen.
Recording can be started even if the wiring
judgment result remains red (FAIL) or yellow
(CHECK).
To Next Page
Loading...
Need help?
General
