APPENDIX B
MAXPRO®NVRs - AXIS Camera/Encoders Discovery and Configuration (using ONVIF)
346 MAXPRO NVR 5.0 Installation and Configuration Guide
B
5. Add and discover the AXIS camera in MAXPRO NVR using the default user name root
and password pass.
Step 2: Discover and Configure the AXIS
Camera/Encoder in MAXPRO
®
NVR
1. In MAXPRO NVR, click the Configurator tab. The System page displays by default.
2. Click the Camera tab to open the Camera page.
3. Click the Auto Discovery button, the Auto Discovery screen is displayed.
4. After the discovery, to add the AXIS cameras, first clear the check boxes corresponding to
all other cameras other than AXIS cameras.
5. Select a AXIS camera that you want to add under. type the User Name and Password of
the third party AXIS camera as shown in the following figure.See the Configuring the
Auto Discovery Settings section on page 131 for more information.
Note: The default user name is root and password is pass.
To Next Page
Loading...
Need help?
General