Honeywell MAXPRO NVR Series - Typical MAXPRO NVR Hybrid System Diagram

SETTING UP THE MAXPRO NVR
Setting up the MAXPRO NVR Turnkey Box Solutions
48 MAXPRO NVR 5.0 Installation and Configuration Guide
3
Note: In the above system diagram NVR SE box is used as an example of a typical
system. Other System diagrams for NVRs (XE, PE and Software only) look similar
to the NVR SE and will have minor differences.
Typical MAXPRO NVR Hybrid System Diagram
The following figure illustrates the MAXPRO NVR Hybrid system diagram.
Figure 3-2 Typical MAXPRO NVR Hybrid System Diagram
Note: In the above system diagram Hybrid NVR SE box is used as an example of a
typical system. Other system diagrams for Hybrid NVRs (XE, PE) look similar to
the NVR Hybrid SE and will have minor differences.
See MAXPRO NVR Hybrid Connections section on page 54 for rear panel connectors to
connect analog video source, looping outputs and IOs.