. . . . .
SECURING MAXPRO NVR
Enabling Remote Desktop
MAXPRO NVR 5.0 Installation and Configuration Guide 265
10. Similarly repeat the step 3 through step 7 for "MaxBootAssistant" and
"TrinityBackupScheduler" and update the credentials.
Enabling Remote Desktop
By default NVR 4.0 turnkey units will have the Remote Desktop option disabled. Perform the
below steps in the order to enable remote desktop.
• Enable remote desktop services
• Enable remote desktop option
Safety Precautions for Enabling Remote Desktop
• NVR should never be used directly over the Internet. Ensure that you always
establish a connection with VPN first and then access NVR through the VPN.
• Ensure that NVR with Remote Desktop Enabled must have Anti virus software
installed and maintained up to date. See Setting Up Antivirus Software for MAXPRO
NVRs to configure the Anti virus software.
• Ensure that all the security patches are up to date in your PC.
WARNING! Running remote desktop services or Terminal Server makes
your system vulnerable to network attacks from malicious
entities. This is especially true if your NVR is made accessible
over the Internet. Please understand the risks involved with this
and enable it only if absolutely necessary.
To enable remote desktop services
1. In the Run command window, type services.msc and then click OK. The Service
window appears.
To Next Page
Loading...
Need help?
General