MAXPRO NVR 5.0 Installation and Configuration Guide 109
6
Configuring MAXPRO NVR
In this chapter...
Section See page...
Overview 110
Configuring the Honeywell cameras with MAXPRO NVR Wizard 111
Navigating to Configurator tab 115
Configuring the System Settings 117
Configuring the Disk Management Settings 122
Configuring the Cameras 126
Adding IP Cameras / Encoders 127
Configuring the Auto Discovery Settings 135
Discovering and Adding Third Party ONVIF and AXIS Cameras 139
Discovering and Adding Multi-channel Encoders 141
Adding FLIR Camera 143
Adding RTSP Cameras/Encoders 144
Configuring the Input and Output for an IP Camera 145
Configuring 360/180 Cameras 147
Managing Analog Cameras 159
Configuring the Input and Output for an Analog Camera 165
Server VMD (SMART VMD) 171
Updating the Cameras 174
Deleting the Cameras 174
Configuring the Schedules 174
Configuring the Sequences 176
Performing User Administration 178
Recommendation to use Low bandwidth stream option 183
Automatic Retry for Backfilled Clips 184
Enable Recording During On Demand Streaming 186
Privacy Protection Settings (GDPR Favored) 188
To Next Page
Loading...
