SECURING MAXPRO NVR
IPsec Policies for Secured Video Data Transmission
276 MAXPRO NVR 5.0 Installation and Configuration Guide
11
IPsec Policies for Secured Video Data
Transmission
This section describes how to create highly secured network connections using the IPsec
policies for secure video data transmission. The recommended types of policies are:
• Unrestricted
•Blocked
• Secured
User needs create these 3 types of policies depending upon the network devices. The detail
explanation is given below.
Unrestricted Network
Unrestricted network is for connecting within your control (inside LAN), so that you need not
perform any security settings for communication between the network devices. This also
applies to devices which cannot establish IPsec communication.
Example where unrestricted network will be required is as follows:
• Connections between cameras and recorder (MAXPRO NVR)
• Connections between Ultra key, Joysticks keyboards to Recorders (MAXPRO
NVR) and Video Management Solutions (MAXPRO VMS)
How to configure Unrestricted connections rule
1. In Run command box type secpol.msc and then click OK. The Local Security Policy
window is displayed as shown below.
2. Under Security Settings pane, right click on IP Security Policies on Local Computer
and then select Create IP Security Policy as shown below.
To Next Page
Loading...
Need help?
General