MAXPRO NVR 5.0 Installation and Configuration Guide 195
7
Verifying the Configuration
Overview
Verifying the configuration of the MAXPRO NVR is the final phase in the commissioning
process. In this phase, you need to verify the working of the MAXPRO NVR.
Before you Begin
Ensure that the configuration of MAXPRO
NVR is complete.
Activities to Perform in this Phase
In this phase, using the MAXPRO NVR user interface, check for the following one after the
other.
• Connection with the MAXPRO NVR sever (logging on)
• Camera listing in the devices window
• Live video display from cameras
• Playback of recorded video
• Inserting comments and marking the point of interest using the bookmark feature in
Timeline window
• Playback of loop (mark in and mark out feature) in Timeline window
• Panning, tilting, and zooming functions
•Acknowledgement of alarms and clearing of alarms
• Image creation
• Clip creation
• Video from the surrounding cameras (video pursuit or surrounding cameras feature in
MAXPRO NVR)
• Saving the salvo layout using the salvo view feature
• Searching recorded video in MAXPRO NVR
• Generating and viewing the event and operator log report
To Next Page
Loading...
Need help?
General