. . . . .
CONFIGURING MAXPRO NVR
Configuring the System Settings
MAXPRO NVR 5.0 Installation and Configuration Guide 117
Configuring the System Settings
The System settings help in configuring the following:
• General System Settings - enable configuring the device name, device description,
and device address for MAXPRO NVR.
• Event Recording Settings - enable configuring the times associated to event and
user based recording.
• Email Settings - enable configuring the SMTP server settings for e-mail
communication of events.
• Archival Schedule - enable configuring the archive schedule for the recordings.
• Edge Sync Settings: allows you to sync and back fill the recordings from camera SD
card to NVR. You can configure when to sync or back fill.
• Site Info - enable configuring and displaying the Site info and License type
information.
• Holiday/Exception Settings for Schedules - enable configuring the holidays and
exceptions for schedule based recording.
To view the system settings
•Click the Configurator tab. The System page (Figure 6-6) appears by default.
Figure 6-6 System page
Configuring General Settings
The general settings enable configuring of the device address, device name, and device
description for MAXPRO NVR.
To Next Page
Loading...
Need help?
General