EasyManuals Logo

Honeywell MAXPRO NVR Series User Manual

Honeywell MAXPRO NVR Series
360 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
PRECAUTIONS
Warranty and Service
22 MAXPRO NVR 5.0 Installation and Configuration Guide
23. Circuit Overloading
Consideration should be given to connection of the equipment to supply circuit and the
effect that overloading of circuits might have on over-current protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should be used when
addressing this concern.
24. Reliable Earthing (Grounding)
Reliable grounding of rack mounted equipment should be maintained. Particular attention
should be given to supply connections other than direct connections to the branch circuit
(for example, use of power strips).
Warranty and Service
Subject to the terms and conditions listed on the Product warranty, during the warranty period
Honeywell will repair or replace, at its sole option, free of charge, any defective products
returned prepaid.
In the event you have a problem with any Honeywell product, please call Technical Support at
1-800-323-4576 (North America only) for assistance or to request a Return Merchandise
Authorization (RMA) number.
Be sure to have the model number, serial number, and the nature of the problem available for
the technical service representative.
Prior authorization must be obtained for all returns, exchanges, or credits. Items shipped to
Honeywell without a clearly identified Return Merchandise Authorization (RMA) number
may be refused.
List of Symbols
The following is a list of symbols that might appear on the NVR.
Symbol Explanation
The WEEE symbol.
This symbol indicates that when the end-user wishes to dis-
card this product, it must be sent to separate collection facili-
ties for recovery and recycling. By separating this product
from other household-type waste, the volume of waste sent to
incinerators or landfills will be reduced, and thus natural re-
sources will be conserved.
The UL compliance logo.
This logo indicates that the product has been tested and is list-
ed by the Underwriters Laboratories.
The FCC compliance logo.
This logo indicates that the product conforms to Federal Com-
munication’s Commission compliance standards.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell MAXPRO NVR Series and is the answer not in the manual?

Honeywell MAXPRO NVR Series Specifications

General IconGeneral
BrandHoneywell
ModelMAXPRO NVR Series
CategoryDVR
LanguageEnglish

Related product manuals