CONFIGURING MAXPRO NVR
Configuring the Sequences
176 MAXPRO NVR 5.0 Installation and Configuration Guide
6
Deleting a Schedule
You can delete a schedule for the camera when you do not want to record video at recurring
intervals.
1. Click the Configurator tab. The System page displays by default.
2. Click the Schedule tab to navigate to the Schedule page.
3. Under Schedules, select the schedule you want to delete from the list. The schedule’s
details appear.
4. Click Delete, and then click Yes in response to the confirmation message.
Configuring the Sequences
A sequence is a set of live video streamed one after the other from cameras for a specified
time interval. You can select the cameras or presets to be included in a sequence and also
specify the time interval for which the video from each camera or preset must be displayed.
Presets must be defined for the cameras before including them in the sequence.
Creating a Sequence
You can create a sequence to display video that is captured from different cameras connected
to MAXPRO NVR. You can add a maximum of 50 sequences in MAXPRO NVR.
To c r e at e a s e q ue n c e
1. Click the Configurator tab. The System page displays by default.
2. Click the Sequence tab to navigate to the Sequence page.
Figure 6-46 Sequence page
3. Click Add.
To Next Page
Loading...
