. . . . .
CONFIGURING MAXPRO NVR
Configuring the Disk Management Settings
MAXPRO NVR 5.0 Installation and Configuration Guide 123
2. Click the Disk tab to open the Disk Management page Figure 6-8.
Figure 6-8 Disk Management page
All the drives available on the MAXPRO
NVR system are listed.
By default, the check boxes corresponding to all the drives except C:\ are selected. C:\ is
reserved for the Operating System data.
Caution: It is recommended that you do not choose the operating system drive for
saving the camera recordings (as a video storage drive). Selecting an
Operating System drive for video storage can lead to system instability.
3. The following information displays under Disk Management.
• Drive Name - displays the drive name such as C:\, D:\ and so on.
• Drive Type - displays the drive type (Fixed or Network).
• Drive Purpose - displays the purpose of the drive (Recording/ Archival)
Note: For Manual or Auto Archiving, ensure that you configure the Drive and select the
Drive purpose option as Archival.
To Next Page
Loading...
