MAXPRO NVR 5.0 Installation and Configuration Guide 25
About This Guide
Overview
This guide describes the procedures and guidelines for installing, configuring and using the
MAXPRO
®
NVR system.
Intended Audience
This document is intended for field and commissioning engineers.
Scope
This guide describes the installation and configuration procedures for both the MAXPRO NVR
turnkey boxed solutions (MAXPRO NVR XE, SE, PE and MAXPRO NVR Hybrid XE, SE, PE
models) and MAXPRO NVR software-only solution. This guide covers the following four major
sections:
• Installing MAXPRO NVR
• Configuring MAXPRO NVR
• Configuring Web Client
• Installing and Configuring MAXPRO NVR Mobile App
• Upgrading MAXPRO NVR
•Securing MAXPRO NVR
Overview Of Contents
The following table describes the detailed structure and the contents of each chapter in this
guide.
No Chapter Description
1 Introduction to MAXPRO NVR Introduces the MAXPRO NVR system and
types of Video surveillance solutions.
2 Commissioning MAXPRO NVR Describes the commissioning procedures
for the MAXPRO NVR system.
3 Setting up the MAXPRO NVR Describes the tasks to set up the:
• MAXPRO NVR Single Box solutions.
• MAXPRO NVR Software-Only solution.
4 Installing the NVR Software Describes the procedures to install the
MAXPRO NVR software.
5 Logging on and Getting
Started
Describes how to log on and gives an
overview of the MAXPRO NVR.
To Next Page
Loading...
Need help?
General