. . . . .
CONFIGURING MAXPRO NVR
Configuring the Cameras
MAXPRO NVR 5.0 Installation and Configuration Guide 137
Adding Additional Streams for a Camera
MAXPRO NVR V4.0 supports adding multiple streams for a single camera. The number of
streams that can be added depends on the model of the camera. You can also configure each
stream for a specific device based on your need. For example you can configure the first
stream for Live recording and the second stream for event based recording. Multistream or
Dual stream is not supported for encoders.
To configure the additional streams for a camera
1. Click the Camera tab, the camera page is displayed with the list of cameras discovered.
2. For the required camera, click on the left corner, the camera properties pane is
displayed see Figure 6-14.
Figure 6-14 Camera Properties Pane
3. Click the Add Stream button, an additional stream (Stream 2) is added see Figure 6-15.
To Next Page
Loading...
