Honeywell MAXPRO NVR Series - Configuring the Snapshot Clip Export Settings; Configuring the OSD Settings; Figure 5-16 Setting the Alarm Threshold; Figure 5-17 Settings for Snapshot Clip Export

. . . . .
LOGGING ON AND GETTING STARTED
Setting Preferences
MAXPRO NVR 5.0 Installation and Configuration Guide 101
2. Under Server Level Settings, type an Alarm Severity Threshold.
Figure 5-16 Setting the Alarm Threshold
3. Click Apply.
4. Click OK to close the dialog box.
Configuring the Snapshot Clip Export Settings
You can configure the time interval for the exported snapshot.
1. Click the Preferences option in the User menu, . The Preferences dialog box
appears. By default, the General Settings tab is selected (Figure 5-17).
2. Under SnapShot Clip Export Settings, select the Clip Export time in seconds.
Figure 5-17 Settings for SnapShot Clip Export
3. Click Apply.
4. Click OK to close the dialog box.
Configuring the OSD Settings
You can configure the OSD settings to change the properties such as type, color, and size of
the text that appears over the video displayed in a panel.
1. Click the Preferences option in the User menu, . The Preferences dialog box
(Figure 5-18) appears.