MAXPRO NVR WEB CLIENT
218 MAXPRO NVR 5.0 Installation and Configuration Guide
9
Prerequisites to access MAXPRO NVR Server through Web Client
The following are the prerequisites to access the MAXPRO NVR server through Web Client.
• Silverlight : Ensure that Silverlight version 5 and above is installed on your machine.
If you don't have the Silverlight plug-in on your machine, you can download it from
the following Microsoft link. http://www.microsoft.com/getsilverlight/Get-
Started/Install/Default.aspx
Caution: For better security, close the browser upon logout.
Note: Silverlight plug-in is not supported by Chrome version 42.x or above and
Microsoft Edge browser.
• Web Browsers Supported on Windows Systems: Ensure that at least one of the
following supported web browsers are installed on your PC:
• Internet Explorer version 8 or above
• Firefox version 15.0.1 or above
• Chrome version 32.x to 41.x only.
Note MAXPRO NVR Web Client is only supported by below Web Browsers on
Windows 10 with Silverlight plug-in installed
• Internet Explorer version 11 or above
• Firefox version 40 or above
• Web Browsers Supported on MAC systems: Not supported.
Setting the MAXPRO Web Configurator
By default MAXPRO NVR installs the Web Configurator and is displayed on your
desktop.
MAXPRO NVR Web Configurator is a utility and it allows you to perform the following:
1. System Configuration
2. Server Configuration
3. Security Configuration
System Configuration tab: The system configuration tab allows you to update the
administrator user credentials and the FPS for a better Stream quality. It also allows you to set
the protocol for secure communication.
Server Configuration tab: The server configuration tab allows you to update the Web Server
and MAXPRO NVR Server IP details.
Security Configuration tab: The Security Configuration tab automates the manual process of
Creating Self Signed Certificate, Installing the Certificate, Binding the generated certificate
To Next Page
Loading...
