. . . . .
CONFIGURING MAXPRO NVR
Configuring the Cameras
MAXPRO NVR 5.0 Installation and Configuration Guide 139
Deleting Additional Streams
1. For the required camera, click on the left corner, the camera properties pane is
displayed see Figure 6-14.
Note: If an additional stream is added then only the Delete Stream button is enabled.
2. Click the required stream tab (For example Stream 1, 2, 3) and then click the Delete
Stream button. A confirmation message Do you really want to delete the stream? is
displayed at the bottom of the screen.
3. Click Yes to delete Or click No to cancel. If you delete the primary stream then all the
configured child streams will be deleted.
Discovering and Adding Third Party ONVIF and AXIS Cameras
The third party ONVIF and AXIS cameras that are discovered in the MAXPRO NVR user
interface do not display the model name. However, the Camera Type field associated to the
ONVIF and AXIS cameras displays “ONVIF DEVICE” and “No Streamer Type” in the Camera
Discovered pane on the Auto Discovery screen.
To Next Page
Loading...
Need help?
General