HP 420

Command Line Reference
System Management Commands
Example
HP420(config-mgmt)#user add web operator david davepass
HP420(config-mgmt)#
user del
This command removes a user account from the access point.
Syntax
user del <name>
name - The name of the user to remove.
(Length: 3-16 characters, case sensitive.)
Default Setting
none
Command Mode
Management Configuration
Example
HP420(config-mgmt)#user del david
HP420(config-mgmt)#
user pwd
This command changes the password for an existing user.
Syntax
user pwd <name> <password>
• name - The name of the user.
(Length: 3-16 characters, case sensitive.)
• password - The new password for the user.
(Length: 3-16 characters, case sensitive)
Default Setting
None
Command Mode
Management Configuration
8-16