Command Line Reference
System Clock Commands
Example
HP420(config)#sntp-server timezone +8
HP420(config)#
show sntp
This command displays the current time and configuration settings for the
SNTP client.
Command Mode
Exec
Example
HP420#show sntp
SNTP Information
=========================================================
Service State : Enabled
SNTP (server 1) IP : 137.92.140.80
SNTP (server 2) IP : 192.43.244.18
Current Time : 08 : 04, Jun 20th, 2003
Time Zone : +8 (TAIPEI, BEIJING)
Daylight Saving : Enabled, from Jun, 1st to Sep, 1st
=========================================================
HP420#
8-38
To Next Page
Loading...
