HP 420 User Manual

Command Line Reference
RADIUS Accounting
radius-accounting-server timeout-interim
This command sets the interval between transmitting accounting updates to
the RADIUS Accounting server.
Syntax
radius-accounting-server [secondary] timeout-interim <number_of_seconds>
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point waits
between transmitting accounting updates. (Range: 60-86400)
Default Setting
3600
Command Mode
Global Configuration
Command Usage
The access point sends periodic accounting updates after every interim
period until the user logs off and a “stop” message is sent.
Example
HP420(config)#radius-accounting-server timeout-interim 500
HP420(config)#
8-71

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C