HP 420 User Manual

Command Line Reference
System Management Commands
Default Setting
Enabled
Command Mode
Management Configuration
Command Usage
• Both the HTTP and HTTPS service can be enabled independently.
• If you change the HTTPS port number from the standard default,
clients attempting to connect to the HTTPS server must specify the
port number in the URL, in this format: https://device:port_number
• When you start HTTPS, the connection is established in this way:
– The client authenticates the server using the server’s digital certif-
icate.
– The client and server negotiate a set of security protocols to use
for the connection.
– The client and server generate session keys for encrypting and
decrypting data.
– The client and server establish a secure encrypted connection.
A padlock icon should appear in the status bar for Internet
Explorer.
Example
HP420(config-mgmt)#https server
HP420(config-mgmt)#
svp
This command enables SpectraLink Voice Priority (SVP) support on the
access point. Use the no form to disable SVP support.
Syntax
[no] svp
Default
Disabled
Command Mode
Global Configuration
8-24

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C