HP 420 User Manual

Selecting a Management Interface
Advantages of Using the CLI
Advantages of Using the CLI
HP420#
Exec Level
HP420(config)#
Global Configuration Level
HP420(<context>)#
Context Configuration Levels (Ethernet, wireless)
Figure 2-1. Command Prompt Examples
■ Provides access to the complete set of the access point configuration
features.
■ Offers out-of-band access, through the RS-232 connection, or in-band
access using Telnet or Secure Shell.
■ Enables quick, detailed system configuration and management access to
system operators and administrators experienced in command prompt
interfaces.
■ Provides help at each level for determining available options and vari-
ables.
CLI Usage
■ For information on how to use the CLI, refer to chapter 3, “Using the
Command Line Interface (CLI).”
■ To perform specific procedures (such as configuring IP addressing), use
the Contents listing at the front of the manual to locate the information
you need.
■ For monitoring and analyzing access point operation, refer to the appro-
priate section in chapter 5, “General System Configuration.”
■ For information on individual CLI commands, refer to the Index or to the
online Help provided in the CLI interface.
2-3

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C