HP 420 User Manual

Command Line Reference
RADIUS Accounting
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for authentication
messages. (Range: 0 or 1024-65535)
Default Setting
1813
Command Mode
Global Configuration
Example
HP420(config)#radius-accounting-server port-accounting 49153
HP420(config)#
radius-accounting-server key
This command sets the RADIUS Accounting server encryption key.
Syntax
radius-accounting-server [secondary] key <key_string>
• secondary - Secondary server.
• key_string - Encryption key used to authenticate logon access for
client. Do not use blank spaces in the string. (Maximum length: 20
characters)
Default Setting
DEFAULT
Command Mode
Global Configuration
Example
HP420(config)#radius-accounting-server key blue
HP420(config)#
radius-accounting-server retransmit
This command sets the number of retries.
8-69

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C