Command Line Reference
Flash/File Commands
Command Mode
Exec
Command Usage
Use the dir command to see the eligible file names.
Example
HP420#bootfile hp420-2.bin
HP420#
copy
This command copies a boot file or software file between an FTP/TFTP server
and the access point’s flash memory. It also allows you to upload a copy of the
configuration file from the access point’s flash memory to an FTP/TFTP server.
When you save the configuration settings to a file on an FTP/TFTP server, that
file can later be downloaded to the access point to restore system operation.
The success of the file transfer depends on the accessibility of the FTP/TFTP
server and the quality of the network connection.
Syntax
copy <ftp | tftp> file
copy config <ftp | tftp> <binary | text>
• ftp - Keyword that allows you to copy from an FTP server.
• tftp - Keyword that allows you to copy from a TFTP server.
• file - Keyword that allows you to copy a boot, software, or configu-
ration file to flash memory.
• config - Keyword that allows you to upload the configuration file
from flash memory.
• binary - Uploads a configuration file in binary format to a FTP or
TFTP server.
• text - Uploads a configuration file in a readable text format to a FTP
or TFTP server.
Default Setting
None
Command Mode
Exec
8-55
To Next Page
Loading...
