HP 420 User Manual

General System Configuration
Setting Management Access Controls
Figure 5-2. Configuring Management Controls
CLI: Configuring Management Controls
CLI Commands Used in This Section
Command Syntax CLI Reference Page
management page 8-13
[no] reset-button enable page 8-20
[no] cli serial enable page 8-17
[no] http server page 8-22
[no] http port <port-number> page 8-21
[no] https server page 8-23
5-9

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C