HP 420

Command Line Reference
RADIUS Accounting
Syntax
radius-accounting-server [secondary] retransmit <number_of_retries>
• secondary - Secondary server.
• number_of_retries - Number of times the access point will try to
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
3
Command Mode
Global Configuration
Example
HP420(config)#radius-accounting-server retransmit 5
HP420(config)#
radius-accounting-server timeout
This command sets the interval between transmitting authentication requests
to the RADIUS server.
Syntax
radius-accounting-server [secondary] timeout <number_of_seconds>
• secondary - Secondary server.
• number_of_seconds - Number of seconds the access point waits for
a reply before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
HP420(config)#radius-accounting-server timeout 10
HP420(config)#
8-70