HP 420 User Manual

Command Line Reference
Flash/File Commands
Example
HP420#show bootfile
Bootfile Information
===================================
Bootfile : hp420-2100B12.bin
===================================
HP420#
show text-config-file
This command displays the current configuration file in a readable text format.
Default Setting
None
Command Mode
Exec
Example
HP420#show text-config-file
## This file is generated automatically by hp Access Point
420.
[system]
country=US
system-name=Enterprise AP
user0-name=admin
user0-password=
user0-class=admin
[ethernet]
speed-duplex=auto
ether-interface-status=Up
ether-admin-status=Up
dhcp=false
address=192.168.1.1
netmask=255.255.255.0
gateway=192.168.1.254
primary-dns-address=0.0.0.0
secondary-dns-address=0.0.0.0
8-59

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C