Command Line Reference
RADIUS Accounting
Command Mode
Global Configuration
Example
HP420(config)#radius-accounting-server enable
HP420(config)#
radius-accounting-server address
This command specifies the primary and secondary RADIUS Accounting
servers.
Syntax
radius-accounting-server [secondary] address <host_ip_address | host_name>
• secondary - Secondary server.
• host_ip_address - IP address of server.
• host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
HP420(config)#radius-accounting-server address 192.168.1.25
HP420(config)#
radius-accounting-server port-accounting
This command sets the RADIUS Accounting server network port.
Syntax
radius-accounting-server [secondary] port-accounting <port_number>
8-68
To Next Page
Loading...
