Command Line Reference
System Management Commands
Example
HP420#show system
System Information
===========================================================
Serial Number : TW347QB099
System Up time : 0 days, 6 hours, 10 minutes, 25
seconds
System Name : Enterprise AP
System Location :
System Contact : Contact
System Country Code : NA - North America
MAC Address : 00-0D-9D-C6-98-7E
IP Address : 192.168.1.1
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.1.254
VLAN State : DISABLED
Management VLAN ID(AP): 1 (U)
IAPP State : ENABLED
DHCP Client : ENABLED
HTTP Server : ENABLED
HTTP Server Port : 80
HTTPS Server : ENABLED
HTTPS Server Port : 443
Slot Status : 802.11g
Radio Status : Disabled
Software Version : v2.1.0.0B07
SSH Server : ENABLED
SSH Server Port : 22
Telnet Server : ENABLED
Max Telnet Session : 4
Console Port : ENABLED
Reset Button : ENABLED
SSID Number Supported : 8
===========================================================
HP420#
show version
This command displays the software version for the system.
Default Setting
None
Command Mode
Exec
8-26
To Next Page
Loading...
