HP 420

Command Line Reference
Flash/File Commands
[management]
cli-prompt=hp420
vlan-enable=false
management-vlan-id=1
management-vlan-tagging=false
iapp-enable=true
svp-supported=false
reset-button=true
serial-console=true
.
.
.
.
HP420#
show text-config-error
This command displays any error messages from the last text format config-
uration file download.
Default Setting
None
Command Mode
Exec
Example
HP420#show text-config-error
No text file error message!
HP420#
8-60