HP 420

Command Line Reference
Wireless Interface Commands
show interface wireless g
This command displays the status for the wireless interface.
Command Mode
Exec
Example
HP420#show interface wireless g
Wireless Interface Common Information
=========================================================================
----------------Identification-------------------------------------------
Description : Enterprise 802.11g Access Point
Radio mode : 802.11b + 802.11g
Channel : 11 (AUTO)
Supported SSID number : 8
Supported Total Client number : 128
Status : Disabled
----------------802.11 Parameters----------------------------------------
Transmit Power : 32% (8 dBm)
Max Station Data Rate : 54Mbps
Multicast Data Rate : 5.5Mbps
Fragmentation Threshold : 2346 bytes
RTS Threshold : 2347 bytes
Beacon Interval : 100 TUs
Authentication Timeout Interval : 60 Mins
Association Timeout Interval : 30 Mins
DTIM Interval : 1 beacon
Preamble Length : AUTO
Slot time : AUTO
----------------Security-------------------------------------------------
Static Keys :
Key 1: OPEN Key 2: OPEN Key 3: OPEN Key 4: OPEN
----------------Antenna--------------------------------------------------
Antenna mode : Diversity
Antenna gain attenuation
Low channel : 100%
Mid channel : 100%
High channel : 100%
=========================================================================
HP420#
8-111