HP 420

Using the HP Web Browser Interface
Status Reporting Features
AP System Configuration. The AP System Configuration table displays the
basic system configuration settings:
■ System Up Time: Length of time the access point has been up.
■ MAC Address: The physical layer address for the Ethernet port interface.
■ System Name: Name assigned to this system.
■ System Contact: Administrator responsible for the system.
■ DHCP Status: Shows if IP configuration is via a DHCP server.
■ IP Address: IP address of the management interface for this device.
■ IP Default Gateway: IP address of the gateway router between this
device and management stations that exist on other network segments.
■ HTTP Server: Shows if management access via HTTP is enabled.
■ HTTP Server Port: Shows the TCP port used by the HTTP interface.
■ HTTP Secure Server: Shows if management access via secure HTTP is
enabled.
■ HTTP Secure Server Port: Shows the TCP port used by the secure HTTP
interface.
■ Secure Shell Server: Shows if management access via Secure Shell
(SSH) is enabled.
■ Secure Shell Port: Shows the TCP port used by the SSH server.
■ Telnet Server: Shows if management access via Telnet is enabled.
■ Country: Indicates the access point’s current Country Code setting.
■ Version: Shows the version number for the runtime software.
4-19