Command Line Reference
RADIUS Authentication
• key_string - Encryption key used to authenticate logon access for
client. Do not use blank spaces in the string. (Maximum length: 20
characters)
Default Setting
DEFAULT
Command Mode
SSID Wireless Interface Configuration
Example
HP420(if-wireless-g-ssid-1)#radius-authentication-server key
green
HP420(if-wireless-g-ssid-1)#
radius-authentication-server retransmit
This command sets the number of retries.
Syntax
radius-authentication-server [secondary] retransmit <number_of_retries>
• secondary - Secondary server.
• number_of_retries - Number of times the access point will try to
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
3
Command Mode
SSID Wireless Interface Configuration
Example
HP420(if-wireless-g-ssid-1)#radius-authentication-server
retransmit 5
HP420(if-wireless-g-ssid-1)#
8-63
To Next Page
Loading...
