HP 420 User Manual

Command Line Reference
RADIUS Authentication
Default Setting
None
Command Mode
SSID Wireless Interface Configuration
Example
HP420(if-wireless-g-ssid-1)#radius-authentication-server
address 192.168.1.25
HP420(if-wireless-g-ssid-1)#
radius-authentication-server port
This command sets the RADIUS server network port.
Syntax
radius-authentication-server [secondary] port <port_number>
• secondary - Secondary server.
• port_number - RADIUS server UDP port used for authentication
messages. (Range: 1024-65535)
Default Setting
1812
Command Mode
SSID Wireless Interface Configuration
Example
HP420(if-wireless-g-ssid-1)#radius-authentication-server
port 49153
HP420(if-wireless-g-ssid-1)#
radius-authentication-server key
This command sets the RADIUS encryption key.
Syntax
radius-authentication-server [secondary] key <key_string>
• secondary - Secondary server.
8-62

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C