HP 420 User Manual

---------------------
Wireless Security Configuration
Configuring MAC Address Authentication
Displaying MAC Authentication Settings. The following example shows
how to display the current authentication configuration on the access point
from the Exec level.
HP420#show authentication
11g 802.1x Authentication Information
============================================================================
ssid 802.1x BroadcastKeyRefreshRate SessionKeyRefreshRate SessionTimeout
============================================================================
1 DISABLED 0 min 0 min 0 secs
2 DISABLED 0 min 0 min 0 secs
3 DISABLED 0 min 0 min 0 secs
4 DISABLED 0 min 0 min 0 secs
5 DISABLED 0 min 0 min 0 secs
6 DISABLED 0 min 0 min 0 secs
7 DISABLED 0 min 0 min 0 secs
8 DISABLED 0 min 0 min 0 secs
11g MAC Authentication Information
============================================================================
ssid AuthMode SessionTimeout
============================================================================
1 LOCAL 0 secs
2 DISABLED 0 secs
3 DISABLED 0 secs
4 DISABLED 0 secs
5 DISABLED 0 secs
6 DISABLED 0 secs
7 DISABLED 0 secs
8 DISABLED 0 secs
AP Supplicant configuration:
============================================================================
802.1x supplicant : DISABLED
802.1x supplicant user : EMPTY
802.1x supplicant password : EMPTY
MAC filter default permision for each SSID(A: Allow, D: Disallow)
SSID: 1 2 3 4 5 6 7 8
PERM: A A A A A A A A
7-36

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C