HP 420

Command Line Reference
Neighbor AP Detection Commands
Example
HP420#show ap-detection config
802.11g Channel : Rogue AP Setting
============================================================
Rogue AP Detection : Disabled
Rogue AP Scan Interval : 720 minutes
Rogue AP Scan Duration : 350 milliseconds
Rogue AP First Scan Delay : 0 minutes
HP420#
show ap-detection table
This command displays the current detected AP database.
Command Mode
Exec
Example
HP420#show ap-detection table
3 Number of APs detected : 14:42, 03/28/2005
BSSID: 00-04-e2-2a-37-3d SSID: ANY
RSSI: 7 Channel: 7
Radio-mode: 11b Adhoc: No
Security: No Encryption
BSSID: 00-0d-9d-c6-d8-8b SSID: WLAN1AP
RSSI: 28 Channel: 6
Radio-mode: 11g Adhoc: No
Security: mCast:WEP-104/uCast:TKIP/1x
BSSID: 00-11-85-ff-62-cd SSID: WLAN1AP
RSSI: 25 Channel: 1
Radio-mode: 11g Adhoc: No
Security: mCast:WEP-104/uCast:TKIP/1x
HP420#
8-128