HP 420 User Manual

Command Line Reference
Flash/File Commands
delete
This command deletes a software or configuration file.
Syntax
delete <filename>
filename - Name of the configuration or software file.
Default Setting
None
Command Mode
Exec
Ca ut ion Beware of deleting software files from flash memory. At least one software
file is required in order to boot the access point. If there are multiple software
files in flash memory, and the one used to boot the access point is deleted, be
sure you first use the bootfile command to update the software file booted at
startup before you reboot the access point. See“Downloading Access Point
Software” on page A-3 for more information.
Example
This example shows how to delete the test.cfg configuration file from flash
memory.
HP420#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
HP420#
Related Commands
bootfile (page 8-54)
dir (page 8-57)
dir
This command displays a list of files in flash memory.
Command Mode
Exec
8-57

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C