HP 420 User Manual

General System Configuration
Configuring SNTP
Figure 5-13. Setting SNTP Parameters
CLI: Setting SNTP Parameters
CLI Commands Used in This Section
Command Syntax CLI Reference Page
[no] sntp-server enable page 8-35
sntp-server ip <1 | 2> <ip> page 8-34
sntp-server date-time page 8-36
[no] sntp-server daylight-saving page 8-36
sntp-server timezone <hours> page 8-37
show sntp page 8-38
5-47

HP 420 Specifications

General

Model	HP 420
Category	Wireless Access Point
Data Link Protocol	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Power Source	Power over Ethernet (PoE)
Operating Temperature	0°C to 40°C