Command Line Reference
RADIUS Authentication
Example
HP420(if-wireless-g-ssid-1)#radius-authentication-server
mac-format multi-colon
HP420(if-wireless-g-ssid-1)#
radius-authentication-server vlan-format
This command sets the format for specifying VLAN IDs on the RADIUS server.
Syntax
radius-authentication-server vlan-format <hex | ascii>
• hex - Enter VLAN IDs as a hexadecimal number.
• ascii - Enter VLAN IDs as an ASCII string.
Default Setting
Hex
Command Mode
SSID Wireless Interface Configuration
Example
HP420(if-wireless-g-ssid-1)#radius-authentication-server
vlan-format ascii
HP420(if-wireless-g-ssid-1)#
show radius
This command displays the current settings for RADIUS servers.
Default Setting
None
Command Mode
Exec
8-65
To Next Page
Loading...
