HP ProCurve 530 NA (J8986A)

A-11
File Uploads, Downloads, and Resets
Transferring Configuration Files
Using the CLI to Copy and Reset Config Files. This example displays how
to reset the configuration file back to the factory-default configuration on the
device.
This example shows how to reset by ‘erasing’ the specified configuration file
stored on the device.
This example displays how to copy the running configuration to a startup
configuration file on the device.
This example displays how to ‘write’ the running configuration to a startup
configuration file on the device.
Using the CLI to Copy Config files to a Remote Server. This example
displays how to copy the startup configuration from the device to a remote
server (TFTP). If using this command for a FTP or STP server, you will need
to include the username and password for the server.
ProCurve Access Point 530#copy factory-default startup-
config
ProCurve Access Point 530#
ProCurve Access Point 530#erase custom-default
ProCurve Access Point 530#
ProCurve Access Point 530#copy running-default startup-
config
ProCurve Access Point 530#
ProCurve Access Point 530#write memory
ProCurve Access Point 530#
ProCurve Access Point 530#copy startup-config tftp
192.168.1.52 copystart
ProCurve Access Point 530#