EasyManua.ls Logo

HPE FlexNetwork 5130 EI Series - Page 89

HPE FlexNetwork 5130 EI Series
314 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
81
0 aborts, 0 deferred, 0 collisions, 0 late collisions
- lost carrier, - no carrier
# Display brief information about Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> display interface bridge-aggregation 1 brief
Brief information on interfaces in bridge mode:
Link: ADM - administratively down; Stby - standby
Speed: (a) – auto
Duplex: (a)/A - auto; H - half; F - full
Type: A - access; T - trunk; H - hybrid
Interface Link Speed Duplex Type PVID Description
BAGG1 UP auto A A 1
Table 17 Command output
Field Description
Bridge-Aggregation1 Layer 2 aggregate interface name.
Current state
Physical link state of the interface:
Administratively DOWN—The interface has been shut
down by using the shutdown command.
DOWN—The interface is administratively up, but its physical
state is down (possibly because no physical link exists or the
link has failed).
UP—The interface is both administratively and physically
up.
IP packet frame type IPv4 packet framing format.
Description Description of the interface.
Bandwidth
Expected bandwidth of the interface. This field is not displayed
when the bandwidth is 0 kbps.
Port priority Port priority of the interface.
Output queue - Urgent queuing:
Size/Length/Discards
Information about the urgent output queue:
Size—Number of packets in the queue.
Length—Maximum number of packets that the queue can
contain.
Discards—Number of dropped packets.
Output queue - Protocol queuing:
Size/Length/Discards
Information about the protocol output queue:
Size—Number of packets in the queue.
Length—Maximum number of packets that the queue can
contain.
Discards—Number of dropped packets.
Output queue - FIFO queuing:
Size/Length/Discards
Information about the FIFO output queue:
Size—Number of packets in the queue.
Length—Maximum number of packets that the queue can
contain.
Discards—Number of dropped packets.
Unknown-speed mode,
unknown-duplex mode
The interface speed and duplex mode are unknown.
Port link-type
Port link type:
Access.
Trunk.
Hybrid.

Table of Contents

Other manuals for HPE FlexNetwork 5130 EI Series

Related product manuals